Packaging Supplies

How to Choose Edge Protectors for Palletized Shipments

· 7 min read · By Rob Puzio

Pallet of cardboard boxes with edge protectors on the corners secured by plastic strapping in a warehouse
Edge protectors spread strapping pressure so box corners hold their shape.

Strapping and stretch film hold a pallet together, but they also put a lot of pressure on the box corners they touch. Without protection, straps cut into cartons, loads lean, and bottom layers crush. Edge protectors fix that for very little money. This guide explains how to choose edge protectors for palletized shipments so your loads arrive square and your boxes arrive intact.

What edge protectors actually do

An edge protector is an L-shaped strip that sits on the vertical corners of a pallet load or under a strap. It spreads the force of the strap across a wider area instead of letting it bite into a single line of cardboard.

They also add stiffness to the corners of the load. Corners carry most of the stacking weight, so a stiffer corner helps the whole stack resist leaning and crushing during transit.

  • Prevent straps from cutting into cartons.
  • Add vertical strength at the corners of the load.
  • Help stretch film and strapping hold a tighter, more even load.
  • Reduce damage claims caused by crushed or shifted boxes.

Choose the right material

Most edge protectors are made from laminated paperboard. They are strong for their cost, easy to cut and recycle with ordinary cardboard. Plastic edge protectors are also available and suit wet or humid conditions where paperboard could soften.

For most dry warehouse shipments, paperboard is the practical choice. Consider plastic when loads sit outdoors, travel through humid conditions or need to be reused many times.

  • Paperboard: low cost, strong, recyclable, best for dry loads.
  • Plastic: moisture resistant and reusable, higher cost per piece.
  • Match the material to how long and where the load will be stored.

Pick the correct size and thickness

Edge protectors come in different leg widths, thicknesses and lengths. A wider leg spreads strapping pressure over more of the carton. A thicker wall gives more crush resistance, which matters for heavy loads and tall stacks.

Length should match the height of your load. A protector that is shorter than the stack leaves the top or bottom cartons exposed. If your loads vary in height, stock a longer length and cut it down at the packing station.

  • Heavier loads call for thicker walls.
  • Wider legs protect more carton surface from strap pressure.
  • Match the length to the stack height, or cut longer pieces to fit.
  • Test one size on a real load before ordering a large quantity.

Place them where the load needs them

At minimum, place a protector under every strap where it crosses a corner or edge. For tall or heavy loads, run protectors on all four vertical corners from the pallet deck to the top layer.

Apply them before strapping or wrapping so the strap or film holds them in place. A loose protector can slip during handling and leave the corner exposed.

  • Put a protector under every strap contact point.
  • Use all four vertical corners on tall or heavy loads.
  • Set them in place before strapping or wrapping.
  • Keep the bottom of each protector flush with the pallet.

Pair them with the right strapping and film

Edge protectors work best as part of a system. Strapping provides the tension, stretch film provides surface containment, and the protector sits between them and the cartons. Choosing one without thinking about the others can leave a weak link.

If you use heavy strapping, protectors matter even more, because tighter straps cut deeper. If you rely mainly on stretch film, a protector under the film at each corner still helps keep the load square.

  • Match strap strength to load weight, then protect the contact points.
  • Wrap film over the protectors to hold them in place.
  • Review the full load: pallet, boxes, protectors, strapping and film.

Related: Packaging supplies from American Price Mark

Label the load so it moves smoothly

A well built pallet still needs to be identified. Place shipping and barcode labels on a flat, visible section of the load rather than over a corner or strap, where they can tear or become hard to scan.

Leave a clear flat area for labels when you place protectors, and use labels with the right adhesive and size for your cartons. As a Florida manufacturer with more than 40 years in labels, we make custom and barcode labels for exactly this kind of work, with proofs in 24 hours.

Related: Barcode labels · Custom product labels · Get a free quote

Build a simple buying checklist

Before you order, write down your typical load weight, stack height and how far the load travels. Those three facts drive nearly every choice above.

Then start with a small quantity, test it on real shipments, and adjust. Our team is open 8am to 8pm, seven days a week, if you want help matching supplies to your operation.

  • Record typical load weight and stack height.
  • Choose material based on storage conditions.
  • Select thickness and length to match the load.
  • Test on a few shipments, then reorder in volume.

Frequently Asked Questions

Do I need edge protectors if I use stretch film?

Stretch film contains the load, but it does little to stiffen the corners. Edge protectors under the film add corner strength and help keep heavy or tall loads square.

Are edge protectors reusable?

Plastic edge protectors can be reused several times. Paperboard ones are usually single use, though they recycle with ordinary cardboard.

Where should edge protectors go on a pallet?

Place them under every strap where it crosses a corner, and on all four vertical corners for tall or heavy loads.

Can American Price Mark supply packaging and labels together?

Yes. We supply packaging and facility supplies through American Price Mark, and we manufacture custom and barcode labels in Florida with proofs in 24 hours.

#edge protectors#corner boards#pallet shipping#strapping#containment#shipping supplies#Florida

Need Custom Labels or Packaging Supplies?

Florida manufacturer, 40+ years of experience, proofs in 24 hours. Open 8am to 8pm, seven days a week.

Get a FREE Quote

No Obligation

Get a FREE Quote

Fast turnaround, competitive pricing, FDA-compliant materials. Tell us what you need and we'll send you a custom quote within 24 hours.

Or call us: (248) 690-6777